|
star21 ®
Пол:  Стаж: 11 лет Сообщений: 262214 Откуда: Екатеринбург

|
Tone2 - Electra2 2.1 STANDALONE, VSTi, AU WIN.OSX x86 x64
Год/Дата Выпуска: 04.2015
Версия: 2.1
Разработчик: Tone2
Сайт разработчика: www.tone2.com/html/electra2%20overview.html Формат: STANDALONE, VSTi, AU
Разрядность: 32bit, 64bit
Таблэтка: Присутствует
Системные требования: Windows 2000, XP, Vista, 7
Mac OSX 10.4 or higher; G4, G5 or Intel Mac with at least 800 Mhz; 512 MB RAM
Описание: ElectraX от Tone2 является отличным плагином синтезатора типа "все в одном", так что мы рады сообщить, что его преемник Electra2 анонсирован. Он потерял «X», но зато получил массу новых функций. Electra2 обещает получить признание посредством "звукового движка высокого качества, поддержки многослойности и большого набора функций для создания музыки". Вот список нововведений: Более 700 дополнительных патчей.
Все заводские звуки были полностью переработаны.
Удобный браузер патчей.
Редактор сэмплов.
Синтез типа «физическое моделирование».
16 новых эффектов.
5 новых типов фильтров.
236 дополнительных форм волны.
Улучшенное качество звука.
Новая графика.
Улучшенный пользовательский интерфейс.
Улучшенная производительность.
Electra2 полностью обратно совместим с предыдущей версией.
УСТАНОВКА
1. Заблокировать доступ к сайту производителя, например, в файле hosts прописать:
127.0.0.1 tone2.com
127.0.0.1 www.tone2.com
127.0.0.1 212.227.140.66
2. Установить плагин
3. Скопировать файл Electra2.t2k в папку, куда установили программу.
4. В свойствах файла Electra2.t2k поставить атрибут "только чтение"
5. Запускаем синтезатор и в окне авторизации указываем путь к файлу Electra2.t2k
6. Перезапускаем плагин.
ВНИМАНИЕ: Программа при каждом запуске будет ругаться, что, мол, копия-то не легальная. Не обращаем внимание, со всем соглашаемся, пользуемся всеми функциями полной рабочей версией.
Изменения
New Ultrasaw oscillators (PW controls detuning): - 4 new oscs 'Hypersaw Vir 3x-9x' which can sound like the Hypersaw of the Virus
- New osc 'Supersaw JP' which has been inspired by the famous JP 8000
- New osc 'Supersaw clean' (same as above, but without disharmonic aliasing)
- New osc 'Supernoise' with a lush and creamy sound
- New osc 'Hypersquare 9x' with 9 detuned squarewaves
- New osc 'Hypernoise 9x' with a lush and creamy sound New effects: - Vocoder Pro is a high-end vocoder with 20 bands. The design is inspired by the legendary EMS 3000.
- Vocoder SVC has been inspired by the famous SVC 350. New features: - The effect parameters of all 4 insert effects can be modulated with the matrix. This can be used to create very unique sounds. Please note that not all possible routings make sense.
- Additional matrix target 'FX Mix' controls the dry/wet level of the insert effect
- Additional matrix targets 'FX Par1-4' control the effect parameters
- The new sound mode 'scientific' turns Electra2 into a precise signal generator
- The new sound mode 'LowCut 140Hz' cleans up the mix by removing low frequencies from Pads, Keys and Leads
- The new sound mode 'HighCut analog' simulates the muffled sound of analog synths and cleans up the mix by removing high frequencies from bass sounds.
- Additional patches which use the Supersaw OSCs: Electra 2.1 now ships with 1240 sounds
- 236 additional waveforms Enhanced sound: - The Vocoder effect has been replaced by an enhanced one
- Smart oversampling of the existing Ultrasaw osciallators
- More linear frequency response
- Replaced 'Reverb Hall' and 'Reverb Room' with better sounding algorithms
- High frequencies of 'Delay' and 'PingPong' effect Enhanced GUI & interface: - Mousewheel support for patch browser
- Better performance when patch browser is open
- Midi CC assignments are shown on top of the knobs
- Midi learn is more intuitive to use (right click on a knob)
- Menus are not longer closed automatically after 10 seconds
- Display of the new Ultrasaw oscs shows spread
- Switching synthesis mode does auto-set PW to a useful value Further enhancements: - Reduced RAM use by 30%. This allows to load 4 additional instances in 32 bit mode.
- Faster loading of patches.
- Reduced CPU use on patch loading. Bug fixes: - Fixed a problem with the LFO sync in song mode which could appear in some hosts
- Fixed a rarely appearing crash after loading a patch and then selecting 'init'->'reset all'
- Fixed a problem with saving the midi learn configuration when several instances were opened and closed at the same time
- Fixed a possible GUI glitch after loading a patch
- Fixed a possible crash which could happen with some very old hosts
- Fixed a problem that could happen if tone was routed in the matrix
- Background grid of step lfo was not displayed correctly
- Fixed a bug in 'Loudness' where high frequencies were boosted in a slightly incorrect way
- Dialog box was opened twice if a double click was used to load a wav to osc Changes: - Renamed 'Loudness' to 'Dynamic loud'
- Renamed 'Bass boost' to 'Dynamic bass'
- Renamed 'Analog' to 'Bass boost'
- Renamed 'Psychoacoust.' to 'Loudness'
|
|
|