|
star21 ®
Пол:  Стаж: 11 лет Сообщений: 262214 Откуда: Екатеринбург

|
TSE Audio - TSE X50 2.0.0 VST, AU WIN.OSX x86 x64
Год/Дата Выпуска: 15.02.2014
Версия: 2.0.0
Разработчик: TSE Audio
Сайт разработчика: www.tseaudio.com/ Формат: VST, AU
Разрядность: 32bit, 64bit
Таблэтка: Присутствует
Системные требования: Windows, Intel Core 2 or newer, Vista / Windows 7 / Windows 8, 32/64bit compatible - VST2
Mac, Intel Core 2 or newer, OS X 10.7 or higher, 64bit compatible - VST2/AU
Описание: TSE X50 - эмуляция популярных топовых гитарных усилителей, которые часто использовались при записи "метала".
Плагин доступен как в 32-битной, так и в 64-битной версиях.
Еще описание
The X50 is a digital emulation of a famous US guitar amp. Because two almost similar amps were made, both red channels are modeled. The green channel is modeled after the first make. You can't go wrong with this amp for metal! TSE X50 Features Input Level: Control the incoming (guitar) signal. Value of 1.0 = +0dB and 2.0 = +6dB.
Output Level: Control the outgoing (amp) signal.
PreGain: Preamp gain, this is the main dirt control of the amp.
Low, Mid, High: Tonestack/Equalizer.
PostGain: Volume/PA overdrive.
LowEnd: The amount of resonance in the (modeled) speaker (~70Hz).
Presence: The amount of presence, 1kHz and up.
Red Ch. Mode switch: Change between MK1 and MK2 version of the red channel (only).
PreAmp switch: Bypass the preamp-section.
PowerAmp switch: Bypass the poweramp-section.
PowerTubes switch: Change between 6L6GC/EL34 tubes in the PowerAmp model.
Quality switch: 'LO' and 'HI' setting. HI setting removes additional aliasing.
Stereo switch: Process two guitars at once. They must be hard-panned left/right to avoid bleed between channels! Panning should be done in the IR-loader or by channel routing.
|
|
|